Hose and Integrity Services
Xiom Energy Services’s hose manufacture dept can supply any fluid or air hose up to 8”, fully pressure tested with the option of being flushed to any standard, sealed and issued with pressure and cleanliness certification, ensuring all hoses are ready to fit by the client or an Xiom Engineer.
Xiom can carry out Hose Integrity Testing either on-site or at Xiom’s facility
- FLUSHING CAPACITY UP TO 1000 cu mts / hour
- PRESSURE TESTING TO 25,000 psi
- MARINE HOSE TESTING
XIOM’s marine testing division can carry out testing and flushing of fluid transport hoses worldwide using our patented testing equipment.
XIOM’s hose test units are used to measure the integrity of oil transport hoses against the manufacturers specifications. This can provide documentary evidence of safe working limits as recommended by OCIMF and BS 1435 part 2.
Tests hoses, risers and pipelines.- Meets the testing requirements of OCIMF.
- Accurate measurement.
- Individual configuration
Xiom’s hose test units carry out hydrostatic testing in cycles up to the hose’s pressure rating. This determines the integrity of the casing from leakage and any out-of-specification elongation of the hose.
Vacuum testing is also carried out to allow inspection of the inner surface of the hose for blisters or separation of the inner tube from the carcass. Electrical continuity of the hose can also be tested to OCIMF requirements.
A specialised hose test unit is available to carry out a destructive burst test on a sample hose section.